| T O P I C R E V I E W |
| Mack |
Posted - 06/02/2010 : 18:05:44
Here is the sickle mower I picked up a couple of weeks ago. It needed a lot of work to get it into this condition. Still need to get the belts put on to make it functional but its getting close to seeing some mowing action.
 |
| 5 L A T E S T R E P L I E S (Newest First) |
| Mack |
Posted - 06/05/2010 : 08:02:07
I have had AC/Simplicity sickle mowers in the past. I must say they are much lighter, easier to move around and mount onto the tractor than this Haban. From reading the manual, a little more complicated to get set up for mowing also. On the plus side, you run this three quarter to full throttle while mowing which should mean a nice cut. Also, it's heavy enough to warrant a dedicated tractor for it. :) |
| skunkhome |
Posted - 06/05/2010 : 00:00:32
quote:
Originally posted by LordByron444
I have a 416H and a sickle bar mower for it. This is the first time I've seen a pic of one installed. Might get mine out and see if it works...
they are a scary looking implement but are a blast to operate. I go down the road looking for lots that need to be mowed just so I can play. I have plans to cut a field what has 3-4 years of growth with small small saplings and briers. Might even get paid to do it. |
| ByronC |
Posted - 06/04/2010 : 20:58:59
I have a 416H and a sickle bar mower for it. This is the first time I've seen a pic of one installed. Might get mine out and see if it works...
|
| skunkhome |
Posted - 06/02/2010 : 23:59:30
Those sickle bar mowers are cool. That is the first I have seen for a 300 or 400 series tractor.
I started to crank up my B112 with sickle bar mower this evening to cut the neighboring abandoned lot but ran out of time after mowing my yard. |
| acb10_64 |
Posted - 06/02/2010 : 18:26:32
Nice Work! I like that cup holder too!  |
