| Author |
 Topic  |
|
|
larry8200
USA
3166 Posts |
 Posted - 04/06/2011 : 12:09:28
|
Breaking in my new Samsung LT210 pocket camera, the Big 10 is always a good subject.
I still marvel at my Big 10, that the PO advertised it for months for $500 with all the attachments and a mountain of parts, and had trouble selling for $400... After going through the fuel system and replacing the head gasket, it is as solid a tractor as I have. The blade and snowblower work great, the sickle bar looks like 10 minutes and it will be mounted and running. The mower deck may need a belt and a idler. It came with multiple new spare belts for the deck, both the drive and spindle.... I've barely spent $50 putting the tractor together. It even had the correct 51R battery in excellent shape and the original battery cables.
Sometimes I feel guilty for so shamelesslly working this mainly original Big 10, but only for a moment. :) I would guess I've ran it 35-40 trouble free hours. At least the rusty old chains are nice and shiny now.
 |
 |
|
|
Talntedmrgreen
USA
4110 Posts |
Posted - 04/06/2011 : 12:57:53
|
Yup, you have a real nice rig there, and at a fraction of what I've seen worse ones sell for up this way. I see a lot more Simplicity's than I do Allis' in my state, and when they pop up, they don't last the day.
I had less trouble mounting my sickle bar than I do my mower deck...it's a breeze! I can't recall, do you have the cable lift, or the manual lift like mine? Mine is the 2 front pins, the belt to the PTO, then attache the chain and you're ready to rock. Need the front chain that holds it in the upright position though, also. That thing is HEAVY when it's up in the air. |
    |
 |
|
|
acb10_64
USA
801 Posts |
Posted - 04/06/2011 : 13:02:15
|
A Bee with a stinger! Pictures look good to me Larry. I'd like to see that sickle bar mounted up! |
Wes
2 1964 Allis Chalmers B-10's
|
|
|
|
larry8200
USA
3166 Posts |
Posted - 04/06/2011 : 14:04:34
|
quote:
Originally posted by Talntedmrgreen
Yup, you have a real nice rig there, and at a fraction of what I've seen worse ones sell for up this way. I see a lot more Simplicity's than I do Allis' in my state, and when they pop up, they don't last the day.
I had less trouble mounting my sickle bar than I do my mower deck...it's a breeze! I can't recall, do you have the cable lift, or the manual lift like mine? Mine is the 2 front pins, the belt to the PTO, then attache the chain and you're ready to rock. Need the front chain that holds it in the upright position though, also. That thing is HEAVY when it's up in the air.
My sickle bar is like yours Josh, I dont have the number for it offhand, but all 4 attachments are for the 725/B1, 3 belt blower, 46" sickle bar mower, 42" bolt together mower deck and 46" remote angle dozer blade.
 |
|
|
|
|
skunkhome
USA
12827 Posts |
Posted - 04/06/2011 : 14:04:53
|
| The sickle bar mower is heavy. More so though when unmounted it is pretty unwieldy. I am always concerned that the cutter would slip and trap a finger or something between it and the stone guards. Ouch! They are IMO crazy scary but a bundle of fun. |
  Phil
"They that can give up essential liberty to obtain a little temporary safety deserve neither safety nor liberty."
Benjamin Franklin |
|
|
|
Talntedmrgreen
USA
4110 Posts |
Posted - 04/06/2011 : 15:05:30
|
| Yeah, it's a trip, fall, pinch, bang head, laceration, etc hazard for sure. Once I had it tucked away and ratchet strapped in the corner of my garage for the winter, I swore I wouldn't wrestle it again until I needed it. It does have a very small footprint when stored in the upright position though! |
|
|
|
|
simplelife
USA
1385 Posts |
Posted - 04/06/2011 : 15:45:50
|
| While the sickle mowers deserve attention for safety, I guess I don't look at them much different than any machine. Dad showed me at an early age how to properly handle the cutter head when raising and lowering it on the ones we used on the farm. No more dangerous than a power saw or even a kitchen knife if not handled properly. |
|
|
|
Talntedmrgreen
USA
4110 Posts |
Posted - 04/06/2011 : 16:20:03
|
| True! Ive had many more injuries with a kitchen knife than a sickle bar...still intimidating lookin machines though! |
|
|
|
|
larry8200
USA
3166 Posts |
Posted - 04/06/2011 : 16:20:50
|
| LOL. If you aren't REAL safety concious, these old fdt's probably aren't for you. |
|
|
|
|
skunkhome
USA
12827 Posts |
Posted - 04/06/2011 : 20:04:43
|
I have been around power equipment all my life and more than a few kitchen knives but nothing brings so vivid a picture to my mind that getting digits chopped off with a sickle bar. |
Phil
"They that can give up essential liberty to obtain a little temporary safety deserve neither safety nor liberty."
Benjamin Franklin |
|
|
|
acdad
USA
1158 Posts |
Posted - 04/06/2011 : 20:35:15
|
Love that machine Larry!
I had an Ag Mechanics teacher in high school who lost an arm from a missing PTO guard on one of his farm tractors, so I can imagine what a sickle bar could do! |
Growing old is inevitable, growing up is optional!
- Chris
Big Ten
912H
|
|
|
|
Talntedmrgreen
USA
4110 Posts |
Posted - 04/06/2011 : 21:30:27
|
When I bought mine, the old guy told me with the straightest face in the world 'they don't make as many of these as they used to...that's why you quit seeing three-legged dogs'
I wanted to laugh, but he was serious...he had 8 fingers (due to woodworking, not lawn care), but it was sobering to listen to him warn me. My wife was horrified and questioned me all the way home about the operation of that tooth and fang contraption.
He also asked if I had a dog... |
|
|
|
|
larry8200
USA
3166 Posts |
Posted - 04/07/2011 : 07:28:09
|
I'll admit I've been lucky, a few close calls, just enough to make me shudder at the thought. This is my 25th year with my own custom cabinet business and gaurds have mostly gotten tossed during machine setup, and since I've always had an affinity for old machinery, half never had gaurds anyway. More than once I've been told I'm too serious when driving, working, and even playing. But my safety record reflects it. (as does my 10 whole fingers)
I can easily see 3-legged dogs around well used sickle bars.... shudder.... |
|
|
|
|
larry8200
USA
3166 Posts |
Posted - 04/07/2011 : 07:34:44
|
| Afterthought: I have 2 kitchen knives I keep VERY sharp. I worked in some restaurants as a teen and was taught to never put sharp knives in the sink... At least once my life expereince has proven the wisdom of that.... |
|
|
|
| |
Topic |
|
New Camera, Old Big 10
