| Author |
 Topic  |
|
7010b1
USA
713 Posts |
 Posted - 06/05/2009 : 14:23:29
|
| sounds good don't for get the set screw on the steering wheel. "split the tractor" is between the BGB and frame. and as far as that goes your taking it all down for paint. if you have a 4 1/2" grinder you can get a wire cup brush for it. I have used them in the past and work great. why are you taking the muffler off for? |
spark up your life with a E3 plug..
 , , ,  , , ,
b1, earlys, big, b12, b110's, 712, 7010, 1316h, homelite T15 and T16, two 410's, over all 20+ of them |
 |
|
|
ozzman232001
USA
65 Posts |
Posted - 06/05/2009 : 15:34:54
|
| well im not doing a "factory restoration" on it. the muffler is coming off to be replaced with a chrome side stack , kinda give it the Big Alley look. That and a different sit is going to be going on it, im keeping the original one and getting it re done but i dont like the arm rest on it, not enough room for my liking. After all said and done after the tractor is done i got a small trailer im going to re-do with wooden floor and wooden sides with a nice stain and high varnish to be pulled behind it, and in the back of the trailer in the wood im going to have Allis Chalmers burned into it. I go to alot of hit n miss engine shows and stuff like that and this is what im planing on taking with me to show. Basically its just a summer project for me, and to see what i can do. |
for free fun and wast of time go to http://ozzman232001.evony.com/ |
|
|
|
Topic |
|
|
|
B110 (new arival)
