| T O P I C R E V I E W |
| mikeman |
Posted - 10/10/2016 : 11:07:44
Picked up a 7016H with a few P.O. modifications. Messed around a little with it no spark , Yet. Still have to figure out engine. numbers not jiving. Look 3 straps and 80 miles.
 |
| 5 L A T E S T R E P L I E S (Newest First) |
| mikeman |
Posted - 10/13/2016 : 10:49:23
Model Number says it is supposed to be 7016H. 1690342.
 |
| mikeman |
Posted - 10/11/2016 : 11:00:18
quote:
Mike, if that crack about 3 straps was for me, TOO SOON!!! Hehe. Nicely done, however. Do you know if the engine is a transplant or not the original shroud? A 7016 should have the 32 cubic inch motor, not the 30, correct? My 7016 had to have a replacement engine, and I went with the 30 cubic inch instead of trying to find the larger. Too expensive and I didn't have time to wait to find one, it was my mower at the time and a guy down the road had the 30 cubic inch available right then.
Yes just for you. I think it is a transplant engine.
Regulator and external coil (very custom)I will check that mfg. number.
Trailer is a snowco. |
| skunkhome |
Posted - 10/11/2016 : 01:24:52
What is the mfg. number on the tractor. Should be under the front edge of the fender pan. Location of the voltage regulator is a bit odd. |
| B-16_IC |
Posted - 10/10/2016 : 19:32:26
Nice looking tractor, the date of the engine would be proper could even be the hood was changed. I like your trailer too! |
| 1014211 |
Posted - 10/10/2016 : 13:34:58
Mike, if that crack about 3 straps was for me, TOO SOON!!! Hehe. Nicely done, however. Do you know if the engine is a transplant or not the original shroud? A 7016 should have the 32 cubic inch motor, not the 30, correct? My 7016 had to have a replacement engine, and I went with the 30 cubic inch instead of trying to find the larger. Too expensive and I didn't have time to wait to find one, it was my mower at the time and a guy down the road had the 30 cubic inch available right then. |
