| T O P I C R E V I E W |
| 19luna57 |
Posted - 02/29/2012 : 13:26:29
Here is hitch I made this morning. Got measurements off post Skunkhome placed on this site. Sure thank everyone for all the info. Phil
 |
| 8 L A T E S T R E P L I E S (Newest First) |
| 19luna57 |
Posted - 03/01/2012 : 01:39:57
Used two C clamps with metal clamped to steel work table and torch. Hope this helps Phil
|
| Dee |
Posted - 02/29/2012 : 18:43:00
what did you use to bend the steel with ? |
| skunkhome |
Posted - 02/29/2012 : 18:21:54
Phil, that hitch looks fine.., you will like that when teamed up with the moldboard plough. |
| Talntedmrgreen |
Posted - 02/29/2012 : 16:37:30
That looks real nice! Very much like an original. Nice work! |
| 19luna57 |
Posted - 02/29/2012 : 14:15:30
Sure wish I was closer,I would releive you of one plow
|
| midnightpumpkin |
Posted - 02/29/2012 : 14:10:00
If anyone wants to build a plow, I have a moldboard I would give to anyone who wants to pick it up.
It is a Brinley 8 inch, no coulter. It was originally for a walk behind tractor. Someone welded a rod onto the shank that will fit in the rear lift of a large frame tractor. I never tried it, as is, but I have heard that the old man who owned it before, me plowed a rather large garden with it.
The price is right!
John U |
| 19luna57 |
Posted - 02/29/2012 : 13:45:42
My next project is the plow,just have to find measurments for the beam,I have the moldboard I am going too use. 8" Syracuse mule plow. |
| Cvans |
Posted - 02/29/2012 : 13:32:46
Looks like it turned out nice. Gotta make you feel good building it yourself. |
