| T O P I C R E V I E W |
| larry8200 |
Posted - 06/18/2011 : 19:53:04
Had to cross the Green Mountains twice to get it. The old 4 cyl Ranger kept the posted speed limit the entire trip, did me proud.
So, The landlord smokes for a minuite when cold. But except for a craftsmen seat and a missing pulley/bad keyway on one deck, everything is compplete and running. The weedcutters cover is in the cab.
$200 Landlord 2110 w/ hydrolift
$150 Weedcutter
$100 2-42" FDT decks, 1 early 36" one belt blower, 1 late 42" one belt blower
FREE 7000 series hood, 3212 transaxle, 2-mufflers for 3300 to 7000 tractors w/ Briggs engine, 2 metal folding chairs.
I figure between me and the trailer (900 pounds) The little 15 year old Ranger pulled a 3,000 pound load across the mountains today. 
This guy still has TONS of tractors and attachments, the 3212H will probably keep me up nights..... 
Aahhhhhh
|
| 15 L A T E S T R E P L I E S (Newest First) |
| ByronC |
Posted - 06/21/2011 : 19:34:14
quote:
Originally posted by K1dan
Paid a visit to Larry and his new toy, (Thanks for the tour, Larry). He told me he was going to have the weed cutter on, but I interrupted him,(sorry). I'm headed back tomorrow to subtract from his herd. Maybe we'll have some pics of it in action. In the mean time here is a shot of him playing.
And I thought I was Big!!! Dang Larry... What are you, 6'7"??? |
| K1dan |
Posted - 06/21/2011 : 14:29:31
Paid a visit to Larry and his new toy, (Thanks for the tour, Larry). He told me he was going to have the weed cutter on, but I interrupted him,(sorry). I'm headed back tomorrow to subtract from his herd. Maybe we'll have some pics of it in action. In the mean time here is a shot of him playing.
|
| snohiker |
Posted - 06/21/2011 : 13:50:35
the tag on my weedcutter is missing to |
| 1014211 |
Posted - 06/21/2011 : 09:02:34
That's exactly like my 2110 plate also. I think my Yeoman looks like that also, it being a 1968 model, too. |
| skunkhome |
Posted - 06/21/2011 : 07:37:48
Larry is that a typical Simplicity builder's plate for that period. Would love to see representative plates from each period. |
| Talntedmrgreen |
Posted - 06/19/2011 : 21:20:35
Weedcutter! =] |
| 1014211 |
Posted - 06/19/2011 : 21:09:40
I thought Josh was talking about the weedcutter, my fault if he was talking about the tractor..... |
| larry8200 |
Posted - 06/19/2011 : 20:17:00
ahh, 990370 is the weedcutter, I thought you wanted the tractor. Well you got both! :) |
| larry8200 |
Posted - 06/19/2011 : 20:11:44
quote:
Originally posted by Talntedmrgreen
Great Larry! The landlord is sharp...certainly a steal. You'll have to get us some better pics of that Weedcutter too! I'm sure you have a test run planned VERY soon.
I'd love to get a nice clean closeup shot of the serial number tag, becasue mine is missing and I'd like to have a reproduction made up.
You are right about the test run AND it being a steal, It needs rings sometime, but it's not in the bug control stage yet. Otherwise it's as tight an original as my BIG TEN. I actually didn't realize how close the LL2110 and LL101 are till today.
If I decide to give this a proper paint job, I'm going to do a complete set. Some previous owner sprayed primer for rust control and didn't tape off anything. RRRR!!!
ID Tag is 4-3/8" X 1-5/8" and is rough. It's enough though.
 |
| 1014211 |
Posted - 06/19/2011 : 20:03:26
Insert Image:  |
| Talntedmrgreen |
Posted - 06/19/2011 : 19:17:40
Great Larry! The landlord is sharp...certainly a steal. You'll have to get us some better pics of that Weedcutter too! I'm sure you have a test run planned VERY soon.
I'd love to get a nice clean closeup shot of the serial number tag, becasue mine is missing and I'd like to have a reproduction made up. |
| larry8200 |
Posted - 06/19/2011 : 16:31:35
After 5 hours of serious elbow grease, degreaser, solvents, and abrasives looking a lot better.
 |
| larry8200 |
Posted - 06/19/2011 : 11:12:34
I'm seeing some real possibilities for a quickie restore.... This has been well maintained. Just have to get that craftsmen seat off it!!!
 |
| olcowhand |
Posted - 06/19/2011 : 09:24:38
You find some great deals Larry! |
| larry8200 |
Posted - 06/19/2011 : 09:17:13
quote:
Originally posted by K1dan
Any idea what he wants for the 3212?
Yup, more than $200
I sent you a PM |
