| T O P I C R E V I E W |
| SimplicitySwede |
Posted - 03/22/2011 : 20:00:44
Got this for 20 along with another deck thats rough. Extra deck looks different then the ones i have. is it a older one?
 |
| 6 L A T E S T R E P L I E S (Newest First) |
| simplelife |
Posted - 03/23/2011 : 22:56:09
quote:
Originally posted by SimplicitySwede
i dont plan on using it lol the deck has some pretty big holes
That should have the arbors and cast pulleys like Joe was looking for. |
| SimplicitySwede |
Posted - 03/23/2011 : 20:59:25
i dont plan on using it lol the deck has some pretty big holes |
| Richard L. |
Posted - 03/23/2011 : 01:19:00
For that deck, clean it up and look for a sticker with the ID numbers on it. Amazingly they are usually there somewhere. I'm thinking it looks like there is one right between the mounting brackets on the front but I can't see it that well. |
| tractorjoe |
Posted - 03/23/2011 : 00:45:29
That deck looks basically identical to the one off of my 1964? Broadmoor.
Mike has a good point about the tabs though.
See page 116 of this manual:
http://bsintek.basco.com/BriggsDocumentDisplay/default.aspx?filename=heCBEN8.wG6rE4Cxc5kbp796Dq
(towards the end)
it looks like it is for a 9906329/990332 Wonderboy rear-engine-rider.
Other than the mounting details, it seems identical to mine. You may run into some clearance problems, but you can be the best judge of that.
|
| simplelife |
Posted - 03/22/2011 : 21:49:53
Looks like an earlier deck similar to the model 289 deck, but the 289 mounting tabs are not angled like that. You are probably close on the RER like the early Wonderboy with the aviator stick steering. |
| SimplicitySwede |
Posted - 03/22/2011 : 20:54:37
Could it be from one of those old RER? |
