Michael's Tractors (Simplicity and Allis Chalmers Garden Tractors)

Active Users: 849 / Visits Today: 108
Highest Active Users: 849

Michael's Tractors (Simplicity and Allis Chalmers Garden Tractors)

All Forums

Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!

Screensize:

UserName:

Password:

Format Mode:

Format:

Message:

* HTML is OFF
* Forum Code is ON

Click here to attach a photo to your post

Check here to include your profile signature.

T O P I C R E V I E W
freddie	Posted - 10/16/2010 : 20:26:00 it seems it had a bit of an oil leek. so i looked in to it and found that the block was cracked right by the starter. so i tore ot apart and welded up the crack, not real fun to weld but got it done. so now i will power wash the hole thing and get it back together.
4 L A T E S T R E P L I E S (Newest First)
freddie	Posted - 10/16/2010 : 21:33:54 thanks rob & daniel. but got it done in about an hour and half. tore it down, welded and put back together.
snohiker	Posted - 10/16/2010 : 21:25:24 nice job freddie i know what you mean dirty alum is the worse its so porous and collects all the oil and crap for years
freddie	Posted - 10/16/2010 : 21:09:51 thats tig welding. i can weld alot better then that. but your trying to burn all the crap out of the aluminum. even after cleaning the heck out of it and pre heating with a propane tourch to try to help burn the junk out of it before you weld it.
olcowhand	Posted - 10/16/2010 : 20:45:05 Your weld looks good. TIG or MIG?

Michael's Tractors (Simplicity and Allis Chalmers Garden Tractors)

This page was generated in 0.03 seconds.